Vitelity Error Codes

Bill_Balvanz — Tue, 12 Nov 2024 22:18:03 GMT

Look up call failure codes

BUSY	This error means we received a busy signal from your server or device

CALL_REJECTED

This error usually means your server or device rejected our call.

CANCEL

Call is cancelled. The dial command reached its number, but the caller hung up before the caller picked up.

CHANUNAVAIL	This error usually means your server or device is not currently registered to our servers.
Recommended Solution:	Please make sure you are registered to the correct inbound server for your account as per the configuration samples found on the support page within the user portal and that you have selected the correct routing method for your DID(s) on the DIDs page. If you are aware of this error and are purposely having calls fail to utilize our failover feature, please disregard this message

CONGESTION	This error usually means your server or device does not recognize the number being dialed.
Recommended Solution:	If using asterisk, make sure you have the correct inbound context specified on your inbound trunk and that you have correctly added an inbound route/extension logic for this DID

NO_ANSWER

This error means we attempted to route the call to your server, but received no answer

NO_USER_RESPONSE

This error means we attempted to route the call to your server, but received no answer

NORMAL_CIRCUIT_CONGESTION	This error usually means your server or device does not recognize the number being dialed.
Recommended Solution:	If using asterisk, make sure you have the correct inbound context specified on your inbound trunk and that you have correctly added an inbound route/extension logic for this DID

ORIGINATOR_CANCEL

Call is cancelled. The dial command reached its number, but the caller hung up before the caller picked up

Over the channel Limit

This call failure could have been the result of various issues. The failure cause could be Post Dialed Delay, Ring back, and or channel limitations.

Recommended Solution:

Please contact Voyant if you have further concerns regarding this failed call. If this DID is assigned to a Virtual PRI you may order more channels within the Order section of the customer user portal. Otherwise please contact our customer support department to have this limit raised.

Please Note: DID numbers with the Unlimited Local DID rate plan may only receive 4 simultaneous inbound calls; Unfortunately, this limit cannot be increased. However, per request we can convert the number to the PPM (Pay Per Minute) rate plan which does not have this channel restriction. If you no longer wish to receive these emails, you may disable this feature within the My Account section of the customer user portal.

REQUESTED_CHAN_UNAVAIL	This error usually means your server or device is not currently registered to our servers.
Recommended Solution:	Please make sure you are registered to the correct inbound server for your account as per the configuration samples found on the support page within the user portal and that you have selected the correct routing method for your DID(s) on the DIDs page. If you are aware of this error and are purposely having calls fail to utilize our failover feature, please disregard this message

UNKNOWN	An unknown error has occurred
Recommended Solution:	Please open a trouble ticket within the user portal for further assistance

article Vitelity Error Codes in Vitelity Portal

Vitelity Error Codes

Look up call failure codes